Specializing in Conveyor Belts & Timing Belts to Help Keep Your Production Running Smooth.
 |
Optibelt OMEGA High Power
High performance timing belt
The optibelt OMEGA High Power high-performance timing belt was especially developed to meet the most demanding requirements.
Dynamic tests with optibelt OMEGA High Power show an increase in performance of up to 150 % compared to the optibelt OMEGA.
The use of new materials allows the life span to be extended even further compared to the optibelt OMEGA HP, depending on the type of application.
The optimised tooth shape with indented tip significantly reduces noise levels.
Sections and lengths
8M | 288 - 3600 mm |
14M | 966 - 4578 mm |
S8M | 560 - 2600 mm |
further dimensions on request |
optibelt OMEGA High Load
High performance timing belt
The optibelt OMEGA High Load high-performance timing belt was especially developed to meet the most demanding requirements and for drives that are subject to heavy shock loads.
Dynamic tests show an up to 30 % increase in performance compared to the optibelt OMEGA High Power.
The special cord design ensures good resistance even in the case of medium and high impact loading.
The optimised tooth shape with indented tip significantly reduces belt noise.
Sections and lengths
8M | 288 - 3600 mm |
14M | 966 - 4578 mm |
S8M | 560 - 2600 mm |
further dimensions on request |
optibelt OMEGA HP
High performance timing belts for HTD and RPP pulleys
The optibelt OMEGA HP high performance timing belt was especially developed for heavily loaded, high speed drives.
Improved materials and highly developed process engineering are the basis for this very high performance level.
For every power transmission requirement there is an appropriate belt section.
Faster, stronger, more compact – that's how the new optibelt OMEGA HP presents itself. A timing belt to meet the highest demands.
Sections and lengths
2MHP | on request |
3MHP | 111 - 1692 mm |
5MHP | 180 - 2525 mm |
8MHP | 288 - 3600 mm |
14MHP | 966 - 4578 mm |
further dimensions on request |
success stories
Reduced wear, reduced costs
Padma Group, Bangladesh
The Padma Group, based in Bangladesh, is one of the world’s largest textile producers and exporters. The company had been experiencing considerable difficulties with a new production machine. The belts used in the machine often needed replacing after just two weeks. The result was high maintenance costs and stoppages in production. After the machine had been fitted with optibelt OMEGA HPand optibelt OMEGA HL belts, however, maintenance costs and downtimes were reduced to a minimum.
optibelt OMEGA HL
High performance timing belts for HTD + RPP pulleys
On drives with a low belt speed, optibelt OMEGA HL timing belts surpass the capacity of optibelt OMEGA HP by up to 15%.
In addition, the design was optimised so that optibelt OMEGA HL is much more suitable for shock loaded drives with extreme fluctuating loads.
When used for new drive designs in these types of application, optibelt OMEGA HL achieves the highest possible functional reliability in combination with optimum efficiency.
Sections and lengths
8MHL | 288 - 3600 mm |
14MHL | 966 - 4578 mm |
further dimensions on request |
optibelt OMEGA
Timing belts / double timing belts - high performance and universal for HTD and RPP pulleys
Intensive development work in our laboratories, confirmed by field trials, has resulted in the powerful optibelt OMEGA range of timing belts.
Our years of experience with optibelt ZR have been applied to this new generation of belts.
OMEGA timing belts set standards for synchronous power transmission and positioning drives.
Sections and lengths
3M | 111 - 1863 mm |
5M | 120 - 2525 mm |
8M | 288 - 4400 mm |
14M | 966 - 4578 mm |
D5M | 565 - 1200 mm |
D8M | 600 - 3600 mm |
D14M | 1190 - 4578 mm |
further dimensions on request |
optibelt OMEGA HP double sided
Timing belts - high performance and universal for HTD + RPP pulleys
The double sided optibelt OMEGA HP is a high-performance timing belt that was especially developed for heavily loaded high-speed drives.
Improved materials and highly developed process engineering are the basis for this very high performance level.
For every power transmission requirement there is an appropriate belt section.
Faster, stronger, more compact – that's how the new double sided optibelt OMEGA HP presents itself. A timing belt to meet the highest demands.
Sections and lengths
D8MHP | 1120 - 3600 mm |
further dimensions on request |
optibelt ZR
Timing belts - double timing belts
The most salient features of the optibelt ZR timing belts are the high quality neoprene compounds, the extremely flexible tension cords made of glass fibre and the abrasion-resistant protective fabric.
A certain level of oil, heat and cold resistance are standard features of ZR timing belts.
Sections and lengths
MXL | 2,64 - 40,4 in |
XL | 6 - 63 in |
L | 10,88 - 81,7 in |
H | 23 - 170 in |
XH | 50,75 - 175 in |
XXH | 70 - 180 in |
DXL | 15 - 31 in |
DL | 18,75 - 60 in |
DH | 24 - 170 in |
further dimensions on request |
optibelt OMEGA FAN POWER
Timing belts for fan drives for HTD and RPP pulleys
The requirements placed upon fan drives in the oil industry are high. The following product characteristics are expected: long service life, maintenance-free, high level of power transmission and antistatic behaviour in accordance with ISO 9563, non-sensitive to external influences such as temperature fluctuations and moisture.
The special tooth form and the use of particularly resistant materials ensure that optibelt OMEGA FAN POWER fulfils these fan drive requirements without compromise.
Sections and lengths
8MFP | 960 - 3048 mm |
14MFP | 1400 - 4578 mm |
further dimensions on request |
optibelt STD / STD HP - HL
Timing belts - high performance and universal
optibelt STD timing belts have curvilinear, particularly shear-resistant teeth.
The timing belt tooth geometry combined with the belt structure leads to even load distribution and optimised engagement of the timing belt pulleys.
Sections and lengths
S5M | 375 - 2000 mm |
S8M | 440 - 3200 mm |
S14M | 1400 - 5012 mm |
DS8M | 1160 - 1776 mm |
S8MHP | 600 - 1912 mm |
S8MHL | 600 - 1912 mm |
further dimensions on request |
optibelt LINEAR
Timing belts with glass cord
optibelt LINEAR neoprene timing belts come with a glass fibre tension cord and are manufactured from sleeves using the spiral cut method.
Sections and lengths
MXL | on rolls measuring 30 m |
XL | on rolls measuring 30 m |
L | on rolls measuring 30 m |
H | on rolls measuring 30 m |
3M | on rolls measuring 30 m |
5M | on rolls measuring 30 m |
8M | on rolls measuring 30 m |
14M | on rolls measuring 30 m |
3MHP | on rolls measuring 30 m |
5MHP | on rolls measuring 30 m |
8MHP | on rolls measuring 30 m |
S8M | on rolls measuring 45 - 58 m |
further dimensions on request |
optibelt OMEGA RB
Special timing belts
The optibelt OMEGA RB timing belt with an additional PK ribbed belt profile on the top surface of the belt is perfect for use in mills, such as food, cereals, fruit and flour mills, where the drive pulley direction on the top surface is reversible and slip is necessary if the drive jams.
Sections and lengths
8M with PK-Back | on request |
14M with PK-profile | on request |
Advantages that speak for Optibelt
The rubber compound filled with aramid fibres is very wear resistant. The PK belt section on the top surface is ground into the higher back of the belt and is therefore inseparably connected to the timing belt
optibelt GREEN GARDEN
Timing belts
GREEN GARDEN timing belts are ideally suited to the requirements for use.
Sections and lengths
All common part numbers can be found for cross-reference purposes in our current GREEN GARDEN reference catalogue | |
TIMING BELT PULLEYS | optibelt OMEGA timing belts run in standard HTD and RPP pulleys |
Optibelt OMEGA High Power
High performance timing belt
The optibelt OMEGA High Power high-performance timing belt was especially developed to meet the most demanding requirements.
Dynamic tests with optibelt OMEGA High Power show an increase in performance of up to 150 % compared to the optibelt OMEGA.
The use of new materials allows the life span to be extended even further compared to the optibelt OMEGA HP, depending on the type of application.
The optimised tooth shape with indented tip significantly reduces noise levels.
Sections and lengths
8M | 288 - 3600 mm |
14M | 966 - 4578 mm |
S8M | 560 - 2600 mm |
further dimensions on request |
optibelt OMEGA High Load
High performance timing belt
The optibelt OMEGA High Load high-performance timing belt was especially developed to meet the most demanding requirements and for drives that are subject to heavy shock loads.
Dynamic tests show an up to 30 % increase in performance compared to the optibelt OMEGA High Power.
The special cord design ensures good resistance even in the case of medium and high impact loading.
The optimised tooth shape with indented tip significantly reduces belt noise.
Sections and lengths
8M | 288 - 3600 mm |
14M | 966 - 4578 mm |
S8M | 560 - 2600 mm |
further dimensions on request |
optibelt OMEGA HP
High performance timing belts for HTD and RPP pulleys
The optibelt OMEGA HP high performance timing belt was especially developed for heavily loaded, high speed drives.
Improved materials and highly developed process engineering are the basis for this very high performance level.
For every power transmission requirement there is an appropriate belt section.
Faster, stronger, more compact – that's how the new optibelt OMEGA HP presents itself. A timing belt to meet the highest demands.
Sections and lengths
2MHP | on request |
3MHP | 111 - 1692 mm |
5MHP | 180 - 2525 mm |
8MHP | 288 - 3600 mm |
14MHP | 966 - 4578 mm |
further dimensions on request |
success stories
Reduced wear, reduced costs
Padma Group, Bangladesh
The Padma Group, based in Bangladesh, is one of the world’s largest textile producers and exporters. The company had been experiencing considerable difficulties with a new production machine. The belts used in the machine often needed replacing after just two weeks. The result was high maintenance costs and stoppages in production. After the machine had been fitted with optibelt OMEGA HPand optibelt OMEGA HL belts, however, maintenance costs and downtimes were reduced to a minimum.
optibelt OMEGA HL
High performance timing belts for HTD + RPP pulleys
On drives with a low belt speed, optibelt OMEGA HL timing belts surpass the capacity of optibelt OMEGA HP by up to 15%.
In addition, the design was optimised so that optibelt OMEGA HL is much more suitable for shock loaded drives with extreme fluctuating loads.
When used for new drive designs in these types of application, optibelt OMEGA HL achieves the highest possible functional reliability in combination with optimum efficiency.
Sections and lengths
8MHL | 288 - 3600 mm |
14MHL | 966 - 4578 mm |
further dimensions on request |
optibelt OMEGA
Timing belts / double timing belts - high performance and universal for HTD and RPP pulleys
Intensive development work in our laboratories, confirmed by field trials, has resulted in the powerful optibelt OMEGA range of timing belts.
Our years of experience with optibelt ZR have been applied to this new generation of belts.
OMEGA timing belts set standards for synchronous power transmission and positioning drives.
Sections and lengths
3M | 111 - 1863 mm |
5M | 120 - 2525 mm |
8M | 288 - 4400 mm |
14M | 966 - 4578 mm |
D5M | 565 - 1200 mm |
D8M | 600 - 3600 mm |
D14M | 1190 - 4578 mm |
further dimensions on request |
optibelt OMEGA HP double sided
Timing belts - high performance and universal for HTD + RPP pulleys
The double sided optibelt OMEGA HP is a high-performance timing belt that was especially developed for heavily loaded high-speed drives.
Improved materials and highly developed process engineering are the basis for this very high performance level.
For every power transmission requirement there is an appropriate belt section.
Faster, stronger, more compact – that's how the new double sided optibelt OMEGA HP presents itself. A timing belt to meet the highest demands.
Sections and lengths
D8MHP | 1120 - 3600 mm |
further dimensions on request |
optibelt ZR
Timing belts - double timing belts
The most salient features of the optibelt ZR timing belts are the high quality neoprene compounds, the extremely flexible tension cords made of glass fibre and the abrasion-resistant protective fabric.
A certain level of oil, heat and cold resistance are standard features of ZR timing belts.
Sections and lengths
MXL | 2,64 - 40,4 in |
XL | 6 - 63 in |
L | 10,88 - 81,7 in |
H | 23 - 170 in |
XH | 50,75 - 175 in |
XXH | 70 - 180 in |
DXL | 15 - 31 in |
DL | 18,75 - 60 in |
DH | 24 - 170 in |
further dimensions on request |
optibelt OMEGA FAN POWER
Timing belts for fan drives for HTD and RPP pulleys
The requirements placed upon fan drives in the oil industry are high. The following product characteristics are expected: long service life, maintenance-free, high level of power transmission and antistatic behaviour in accordance with ISO 9563, non-sensitive to external influences such as temperature fluctuations and moisture.
The special tooth form and the use of particularly resistant materials ensure that optibelt OMEGA FAN POWER fulfils these fan drive requirements without compromise.
Sections and lengths
8MFP | 960 - 3048 mm |
14MFP | 1400 - 4578 mm |
further dimensions on request |
optibelt STD / STD HP - HL
Timing belts - high performance and universal
optibelt STD timing belts have curvilinear, particularly shear-resistant teeth.
The timing belt tooth geometry combined with the belt structure leads to even load distribution and optimised engagement of the timing belt pulleys.
Sections and lengths
S5M | 375 - 2000 mm |
S8M | 440 - 3200 mm |
S14M | 1400 - 5012 mm |
DS8M | 1160 - 1776 mm |
S8MHP | 600 - 1912 mm |
S8MHL | 600 - 1912 mm |
further dimensions on request |
optibelt LINEAR
Timing belts with glass cord
optibelt LINEAR neoprene timing belts come with a glass fibre tension cord and are manufactured from sleeves using the spiral cut method.
Sections and lengths
MXL | on rolls measuring 30 m |
XL | on rolls measuring 30 m |
L | on rolls measuring 30 m |
H | on rolls measuring 30 m |
3M | on rolls measuring 30 m |
5M | on rolls measuring 30 m |
8M | on rolls measuring 30 m |
14M | on rolls measuring 30 m |
3MHP | on rolls measuring 30 m |
5MHP | on rolls measuring 30 m |
8MHP | on rolls measuring 30 m |
S8M | on rolls measuring 45 - 58 m |
further dimensions on request |
optibelt OMEGA RB
Special timing belts
The optibelt OMEGA RB timing belt with an additional PK ribbed belt profile on the top surface of the belt is perfect for use in mills, such as food, cereals, fruit and flour mills, where the drive pulley direction on the top surface is reversible and slip is necessary if the drive jams.
Sections and lengths
8M with PK-Back | on request |
14M with PK-profile | on request |
Advantages that speak for Optibelt
The rubber compound filled with aramid fibres is very wear resistant. The PK belt section on the top surface is ground into the higher back of the belt and is therefore inseparably connected to the timing belt
optibelt GREEN GARDEN
Timing belts
GREEN GARDEN timing belts are ideally suited to the requirements for use.
Sections and lengths
All common part numbers can be found for cross-reference purposes in our current GREEN GARDEN reference catalogue | |
TIMING BELT PULLEYS | optibelt OMEGA timing belts run in standard HTD and RPP pulleys |
