Specializing in Conveyor Belts & Timing Belts to Help Keep Your Production Running Smooth.
 |
Feature
With new types of synchronous transmission modes
The belts no need lubrication,no slip ,no pollution
The transmission efficiency more than 98%
Resistant to shock loading
Speed ratio range reach 1：10
Allow linear velocity can be up to 50 m/s
Good Dynamic bending wind performance
Good fatigue performance Good Ozone performance
Heat resisting abrasion characteristics
Less noise
Long service life
Oil Resistant
Supply Characteristics
All kinds of molds more than 5000 pieces.
Any width or full sleeve according to customer's requirement.
Addtional characteristics available anti-static,heat-resistant, low temperature resistance ect.
Very Fast Delivery, standard products no MOQ.
Technical parameters
T teeth Industrial Rubber timing belt
Type Pitch Pb(mm) Tooth height ht(mm) Belt thickness hs(mm) Angle β° | ||||
MXL | 2.032 | 0.51 | 1.14 | 40 |
XXL | 3.175 | 0.76 | 1.52 | 50 |
XL | 5.08 | 1.27 | 2.3 | 50 |
L | 9.525 | 1.91 | 3.6 | 40 |
H | 12.7 | 2.29 | 4.3 | 40 |
XH | 22.225 | 6.35 | 11.2 | 40 |
XXH | 31.75 | 9.53 | 15.7 | 40 |
T2.5 | 2.5 | 0.7 | 1.3 | 40 |
T5 | 5 | 1.2 | 2.2 | 40 |
T10 | 10 | 2.5 | 4.5 | 40 |
T20 | 20 | 5 | 8 | 40 |
AT5 | 5 | 1.2 | 2.7 | 50 |
AT10 | 10 | 2.5 | 5 | 50 |
AT20 | 20 | 5 | 8 | 50 |
Technical parameters
Arc Teeth Industrial Rubber Timing Belt
Type Pitch Pb(mm) Tooth height ht(mm) Belt thickness hs(mm) Angle β° | ||||
HTD | 2M | 2 | 0.75 | 1.36 |
3M | 3 | 1.17 | 2.4 | |
5M | 5 | 2.06 | 3.8 | |
8M | 8 | 3.36 | 6 | |
14M | 14 | 6.02 | 10 | |
20M | 20 | 8.4 | 13.2 | |
STPD/STS | S2M | 2 | 0.76 | 1.36 |
S3M | 3 | 1.14 | 2.2 | |
S4.5M | 4.5 | 1.71 | 2.81 | |
S5M | 5 | 1.91 | 3.4 | |
S8M | 8 | 3.05 | 5.3 | |
S14M | 14 | 5.3 | 10.2 | |
RPP/HPPD | 2M | 2 | 0.76 | 1.36 |
3M | 3 | 1.15 | 1.9 | |
5M | 5 | 1.95 | 3.5 | |
8M | 8 | 3.2 | 5.5 | |
14M | 14 | 6 | 10 | |
Belts & Pulleys Selection Referance
Feature
With new types of synchronous transmission modes
The belts no need lubrication,no slip ,no pollution
The transmission efficiency more than 98%
Resistant to shock loading
Speed ratio range reach 1：10
Allow linear velocity can be up to 50 m/s
Good Dynamic bending wind performance
Good fatigue performance Good Ozone performance
Heat resisting abrasion characteristics
Less noise
Long service life
Oil Resistant
Supply Characteristics
All kinds of molds more than 5000 pieces.
Any width or full sleeve according to customer's requirement.
Addtional characteristics available anti-static,heat-resistant, low temperature resistance ect.
Very Fast Delivery, standard products no MOQ.
Technical parameters
T teeth Industrial Rubber timing belt
Type Pitch Pb(mm) Tooth height ht(mm) Belt thickness hs(mm) Angle β° | ||||
MXL | 2.032 | 0.51 | 1.14 | 40 |
XXL | 3.175 | 0.76 | 1.52 | 50 |
XL | 5.08 | 1.27 | 2.3 | 50 |
L | 9.525 | 1.91 | 3.6 | 40 |
H | 12.7 | 2.29 | 4.3 | 40 |
XH | 22.225 | 6.35 | 11.2 | 40 |
XXH | 31.75 | 9.53 | 15.7 | 40 |
T2.5 | 2.5 | 0.7 | 1.3 | 40 |
T5 | 5 | 1.2 | 2.2 | 40 |
T10 | 10 | 2.5 | 4.5 | 40 |
T20 | 20 | 5 | 8 | 40 |
AT5 | 5 | 1.2 | 2.7 | 50 |
AT10 | 10 | 2.5 | 5 | 50 |
AT20 | 20 | 5 | 8 | 50 |
Technical parameters
Arc Teeth Industrial Rubber Timing Belt
Type Pitch Pb(mm) Tooth height ht(mm) Belt thickness hs(mm) Angle β° | ||||
HTD | 2M | 2 | 0.75 | 1.36 |
3M | 3 | 1.17 | 2.4 | |
5M | 5 | 2.06 | 3.8 | |
8M | 8 | 3.36 | 6 | |
14M | 14 | 6.02 | 10 | |
20M | 20 | 8.4 | 13.2 | |
STPD/STS | S2M | 2 | 0.76 | 1.36 |
S3M | 3 | 1.14 | 2.2 | |
S4.5M | 4.5 | 1.71 | 2.81 | |
S5M | 5 | 1.91 | 3.4 | |
S8M | 8 | 3.05 | 5.3 | |
S14M | 14 | 5.3 | 10.2 | |
RPP/HPPD | 2M | 2 | 0.76 | 1.36 |
3M | 3 | 1.15 | 1.9 | |
5M | 5 | 1.95 | 3.5 | |
8M | 8 | 3.2 | 5.5 | |
14M | 14 | 6 | 10 | |
Belts & Pulleys Selection Referance
